User's Manuals

The use of Usfos and the Pre- and Post -processors are described
in following documents:

Document no 01 : Usfos Commands. Overview and Description

Document no 02 : Usfos Graphical User Interface (xact)

Document no 03 : Extracting text & tables from Usfos (Postfos)

Document no 04 : Using Macros in Postfos

Document no 05 : Usfos User's Manual, Introduction

Document no 06 : Usfos User's Manual, Program Concept

Document no 07 : Usfos User's Manual, Modelling

Document no 08 : Usfos User's Manual, Solution Strategy

Document no 09 : Usfos User's Manual, Running Usfos

Document no 10 : Usfos User's Manual, Text Output

Document no 11 : Modelling of Piles

Document no 12 : Modelling of Guided Nodes (Pile-in-Leg)

Document no 13 : Converting Models

Document no 14 : FACT: Extracting Beam Element Results

Document no 15 : JNTRES: Print of Joint Connection Results

Document no 16 : PILERES: Print of Total- and Pile Reactions

Document no 17 : D2P: Nodal Displacement to Prescribed Displacmenet input to Usfos

Document no 18 : Xact_Cloud_Sharing: Sharing Usfos analysis results using Ceetron Cloud